Metal Detectors
Depar Detector MT 5500
Depar Detector MT 5500
Depar Detector MT 5500
Depar Detector MT 5500
Depar Detector MT 5500
Depar Detector MT 5500
Depar Detector MT 5500
Depar Detector MT 5500
Depar Detector MT 5500
Depar Detector MT 5500
Depar Detector

Brand: Garrett

MT 5500

Garrett MT 5500

$4,995.00 BUY NOW


Multi-dimensional scanning indicates whether a metal target is located on the left,

right or center of the archway.

Uniform detection field eliminates "hot spots."

20 standard programs for security application versatility.

Microprocessor technology in detection and control circuitry. Maximum of 200 distinct

sensitivity levels.

Overhead control unit: LCD, alarm light, LED bar graph and control touchpads—plus

all wiring, connections and electronics—are integrated into a single external overhead control

box compartment to eliminate wire exposure.

Tamper proof settings through computerized access codes.

Three levels of ankle boost sensitivity.

Self diagnostic program: complete and automatic.

Multiple coil design to minimize false alarms.

Rugged, lightweight design provides simple maintenance and easy portability.

Easy assembly: designed with only four (4) pieces and eight (8) screws.

Simple-to-follow instructions.

Optional battery pack for use anywhere; provides up to

20 hours of backup.

Limited 24-month warranty: parts and labor.


Technical Specifications


Operating: -4° F (-20° C) to +122° F (50° C)

Humidity to 95% non condensing

Storage: -40° F (-40° C) to 158° F (70° C)


Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 24 watts; no rewiring,

switching or adjustments required.

Weatherproofing / Foreign Object Protection Standards

Meets IP 31, IEC Standard. "Degrees of Protection provided by Enclosures,"

IEC 529.

Interference Suppression

100% sensor coil Faraday shielding; RFI interference reduced with

hardware; special Garrett built-in circuitry for noise suppression and

ignoring x-ray monitors. Physical interference minimized by coil design

and circuitry.

Traffic Counter

Built-in and resettable with current reading available on LCD panel.


Multiple channels permit several MT 5500s and other Garrett detectors to

operate simultaneously in close proximity.


Ready light indicates unit is operational; alarm lights and audible alarms

are activated when the target amount of metal is detected; location of

alarm lights on left and right side of display combined with variable tone

indicates which side of the person the target is located.


Dual-level access codes required to set or change all sensitivity settings

and detection programs; one level for use by supervisors in selecting

programs and sensitivity and the other for initial set-up and overall control;

non-resettable sequence code logs all changes made whenever sensitivity

codes are accessed. An audible alarm reports unauthorized attempts

at access.

Infrared Sensor

Improves analysis of detection signal; increases throughput; helps

eliminate "false alarms" and also provides accurate traffic counter.

Control Outputs

Solid state switches (low voltage AC or DC) for operating external alarms

and control devices.


Programs designed to eliminate the problem of dissimilar targets canceling

each other.


Attractive scratch and mar-resistant laminate with resilient end caps;

control panel and cross members made of heavy duty aluminum.


Limited 24 months, parts and labor.